Products

High quality Automatic Plywood veneer Core patcher repairing machine manufacture

Veneer patching machine is used in plywood production process, to patch the natural veneer defect and dots that exists in veneer surface and core veneer, suitable for patching of various types veneer which in different thickness, it can improve the grade and quality of veneer.

INQUIRY

Description

In particular wood-based panels plywood production process, we need to repair natural defects board. For a long time, China's plywood production enterprise is mostly hand-repair method, even with a knife die direct repair, and can only make out shapes and blocks, and then manually filling and paper tape or hot melt adhesive filaments,the process material costs, labor costs are also time-consuming, depending on the mend after being significantly affect the appearance.

Our automatic Veneer Patching machine with a pressing mold, to remove the defects and replacement with a good core to be a good core. The machine is suitable for a variety of wood veneer repair. It is simple,fast speed, manpower saving,to reduce production costs and improve the quality of the board.

pic-1

pic-2

pic-3

Product Application

Optional patching size:

40x60mm
60x100mm
75x130mm
90x150mm

Mending shape:butterfly or oval
Automatic Veneer Patching Repair Machine Veneer Patcher for Plywood Making
Optional fully automatic loading,higher capacity.

Plywood core veneer patcher is repairing veneer by patching the holes and knots to improve the value of the core veneer.

Mending veneer thickness	0.8～3 mm
Mending veneer size (butterfly model )	40×60 mm	60×100 mm	75×130 mm	90×150 mm
Mending speed	（Each process takes about 3～5 seconds.）
Power	4.25 KW		6.05 KW
Compressed air	4～6kg/cm2
Normal oil pressure	16 MPa
Diameter of cylinder	Φ50 mm	Φ63 mm	Φ80 mm	Φ80 mm
Overall dimension	1650L×1300 W×1750H mm		1810L×1500W×1750H mm
Approx weight	1300 kg		1500 kg

Veneer patching machine can patch/ mend/ fix/ repair veneer that has holes/ defects/ scars, so the patched veneer will have a better smoothness/ flatness.

Working veneer thickness 0.6~3mm
Patching size on veneer sheet 40*60mm or 60*100mm two sizes optional;
Patching frequency 3~5s/time;
Motor power 4.25KW;
There are compress air device for veneer cutting,working air pressure 4~6kg/cm2;

The defect ponits replaced by good veneer.
Cylinder diamter 50mm (63mm);
Dimension 1650*1300*1750mm
Net weight 1550kg;

"Revolutionizing Veneer Repairs - Check Out This Incredible Machine!" Veneer Patching Machine