L Type Core Veneer Finger Jointing Type Core Composer
|2||Working veneer length||mm||14000|
|5||Feeding speed||Max. m/Min||35-40|
|6||Conveying device length||mm||2600mm|
|7||Output of finished products||Set/h||300|
|8||Total power required||Kw||40.75|
|10||Conveyor speed||Max m/Min||130|
|12||Working veneer width||mm||1250-1270|
|13||Working veneer length||mm||1250-1270|
|14||conveyor device for waste||bin|
|16||Driving device||3kw servo motor|
|17||PLC system||Taiwan Delta|
|No.||Application part||Configuration||Product model||Brand||Qty|
|1||Main machine body||main machine base||channel steel + steel plate cutting||Factory self made||1|
|2||Front drive unit||Planetary reducer||PF115-8||EF||1|
|3||Finished cutter driving device||Planetary reducer||PF142-8||EF||1|
|4||Rear drive device||Planetary reducer||PF142-8||EF||1|
|5||Middle drive device||Planetary reducer||3KW-380V||INVT||1|
|6||Teeth shear power||Turbo-worm reducer||NMRV130||Jiangheng||1|
|Three-phase asynchronous motor||YX3-132M-4 5.5KW||Zhongtai||1|
|7||Tooth knife||TCT blade the most sharpest knife||Factory self made||1|
|8||Finished product shearing device||TCT blade the most sharpest knife||Factory self made||1|
|9||Control system||PLC computer controller||Programmable 32 points output||Taiwan Delta||1|
|10||4*4 horizontal transmission and vertical device||BCH series gear reducer||wbo-0.75kw-11||Zhongtai||1|
|11||Finished products stacker||BCH series gear reducer||Wbo-0.75kw-11||Zhongtai||1|
Our machine advantage compare with other factorys。
1. Our core composer adopts electromagnetic clutch with synchronous axis, and the front veneer move and pulls the back veneer to avoid the overlapping and veneer stucking. Other manufacturers are servo motors with up and down chain drive, through the chain to move veneer, behind the veneer push the front of the veneer drive, easy to cause veneer stucking.
2. Our core composer has two press wheel. The front one is against to transport gear for transporting core veneer. The behind one is against to cooling wheel for cooling the glue. Two press roller make board connection part more even. But other factory only have one pressure wheel. The transport gear is drived by electromagnetic clutch
3. Five pieces servo motor, 2pcs*3kw servo motor for cutting. 2pcs*3kw servo motor for driving. 1pc*1.1kw servo motor for waste veneer removing. All use Planetary reducer. Other factory only have 2 pieces servo motor for driving. Others are all normal motor.
4. Our machine use two bearing to fix the cutter blade. It can reduce the friction with cutter, so it is more durable. Other factory use copper block to fix blade. It need oil oftenly, and if too tight, the friction is too big. If too loose, it will cause cutting not precise.
5. We add one spring on cutter part, it can reduce noise and shock. So the cutter is more precise and durable.
6. The main drive gear is made of 40 Chromium Manganese Titanium material
7. Glue trough is made of aluminum, better Thermal conductivity than iron. Price is 5-7 times of iron.
8. Gree air condition. Quality guaranteed brand.