Products

Full plywood plant 3d

INQUIRY

Description

Film Faced Plywood

Also named film faced shuttering plywood, construction plywood, marine plywood for outdoor construction.

Specification

Size: 1220x2440mm(4'x8'), 1250x2500mm(4.1'x8.2'), 915x1830mm(3'x6')

Plies: From 7 to 15 depending on thickness

Film: brown film, black film, red film

Thickness:9mm, 12mm, 15mm, 18mm, 21mm, 25mm

Thickness tolerance: Standard thickness±0.2-0.8mm

Core: poplar, eucalyptus, birch, pine, combi…

Density: 500~680kg/m3

Glue: WBP(phenolic, melamine), MR

Formaldehyde Emission: E2

Moisture content: 8%-14%

Hot press: 1 time, 2 times

Edge Treatment: Sealed by waterproof paint

Features and advantages

● Light weight

● Easy to cut

● Waterproof

● Corrosion-resistant

● No warping, no fracture

● Smooth surface, easy to plastering

● More re-used time

Film

Edge treatment

Package

Film faced plywood making production process

Core Veneer getting from market

1. Gluing (4ft glue spreader )

2. Cross-banded plies( manual core veneer forming and batching) Better manual composing Can also consider more automatic paving line solutions

HOT PRESS

Film coated

Plies

Thickness(mm)	Plies
9	7
12	8
15	9-10
18	11
21	13

Process for 2 times hot press /high quality film faced ply:it is 2 times hot press:procedure:Cold press,surface of plain board core repair and finishing, hot press, putty finishing, calibration sanding,and film face lamniation hot press.

1 time hot press film faced is normal or bad quality board

Process: core veneer forming and combine then directly go to hot press. Only One time hot press. Film face was laminated pessing when doing core veneer forming.

One time hot press film faced it is film laminating at hot pressing, film laminating is hot press.